FAQ category: DIY

What is the weight and thickness of your masking paper?

Weight is 45 GSM (grams per square metre), and thickness is 74 MU (measurement unit – used to measure area).

What size nozzles can I get for my DIY unit?

The Standard spray attachment and the I-Spray attachment have a 2.5mm nozzle.The Gravity fed attachment and the Brilliant attachment both have 1.8mm nozzles.

Are there any accessories or parts available for the Furno Heat guns?

Yes, the Furno range has a few accessories available, including deflector nozzles, scrapers and more. Please take a look at the Furno Accessories page for a complete list. However, there are not any internal replacement parts...

How to remove the power cord from the Furno heat gun?

Once the cord is attached to the Furno heat gun it is designed to stay attached.

Can I spray the ceiling with the Flexio series?

Yes, you can. For the handheld sprayers (Flexio 590), we recommend keeping the maximum tilt of the sprayer to a 45-degree angle to avoid any chance of paint getting back into the turbine. The stationary Flexio...

Can I spray 2 pack paints with my sprayer?

DIY products are generally not suited to 2-pack paints, as they have plastic components that will wear prematurely. The flash points of solvent-based products can be a safety hazard when used incorrectly / with the wrong...

Can I spray both water based, and oil based paints?

Yes you can, but to ensure a great finish, follow these recommendations: If using water-based paints, any spray attachment can be used, as long as the paint is the correct viscosity for the sprayer. For oil-based...

Everything is set up correctly and my unit is working, why is my paint refusing to go through the unit?

Have you tried testing the unit with water? If water goes through the unit smoothly, it may be that the paint isn’t suitable for the unit you’re using.

My sprayer is blowing air, but not drawing paint from the container?

The breather hole on the top of the suction tube is mostly likely blocked. Try removing the suction tube, cleaning thoroughly and once re-installed, give it another shot. If that has not worked, it could be...

What is the Brilliant Spray Attachment for?

The Brilliant spray attachment is best used on your fine finish projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray and standard attachments. Depending on your...

What is the Standard Attachment for?

The Standard spray attachment is your all-round attachment for a variety of paints and stains. It can be used both indoors and outdoors, where more control and a smoother finish is desired over the iSpray attachment....

What is the iSpray attachment for?

The iSpray attachment, which will spray unthinned coatings including acrylic paint and stains, is ideal for big surface projects such as spraying walls, sheds, fences etc. It will provide a roller-like or slightly stippled finish. The...